 |
 |
 |
|
Ideal to view unreachable impossible-to-see total-dark and large viewing areas OK for Saltwater Environments & Industrial Inspection Underwater Athletic Movement, Boat Inspection, Check anchor set, Marine Life observation Bridge & Dam inspection, Tank inspection, Docks & pier surveillance, Whale Watch, Fish Search Search & rescue, Inspect & monitor swimming pools, Swamps, river, & lake watch, Boat inspection Bird Nest Watch, Roofing Inspection, Underwater farm surveillance, Check crab pots & lobster traps Exploring shipwreck & submerged objects, Discover treasure, Cave search, Rain forest watch, Storm Watch
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Description (SEE VIDEO BELOW)
- 560TVL Ultimate Video Inspection Pole Cam w/ Adjustable LED Brightness
- Specification:
- Lens
- Fixed Built-in 3.6mm Board Lens (FOV: - 92º Diagonally)
- Image Sensor
- Sony 1/3" Super HAD (HQ) Color CCD
- Lens
- Fixed Built-in 3.6mm Board Lens (FOV: - 92º Diagonally)
- Max. Depth
- Maximum depth can be submerged vertically up to 230ft (70M)
- Signal System
- NTSC
- Luminance S/N Ratio
- Over 50dB (AGC off)
- Gamma Correction
- r = 0.45
- Electronic Shutter
- 1/60~1/100,000/Sec
- Special Functions
- Auto White Balance (AWB) / Auto Backlight Correction (BLC)
- LED
- 12 Bright White LEDs (Brightness adjustable manually from off to maximum)
- Night Visibility
- Appx. 50 ~ 60ft in the total darkness when LEDs are turned on
- Day Visibility
- Appx. 3 inches from the camera to infinity
- Video Resolution
- 560 TVL (410K pixel)
- Video Connector
- RCA Plug
- Power Consumption
- 120mA when LED off ~ 220mA w/ Max. LED Brightness
- Minimum Illumination
- 0.2 LUX when LED off
- Camera Housing
- Brass w/ Special Acetyl Protected Coating
- Weight / Dimension
- 8.8oz (250g) / Φ40 x L62mm (Φ1.58”x2.44”)
- Operating Temp.
- -10ºC ~ 50ºC (14ºF ~ 122ºF)
- Warranty
- One Year Full Warranty including Parts & Labor
- Detachable Pole Mount Monitors (Optional)
- 5.6" Monitor - Pole mount pre-assembled
- 7" DVR Monitor - Pole mount pre-assembled &
- Telescopic Pole
- * Selectable from 4~8ft, 6~18ft, or 8~23ft. -
- * Requires only a screw driver to assemble or disassemble the camera and cable
- from the pole.
- * Components consist of Water Resistant Fiberglass Pole, Die cast Metal Thread, &
- Anodized Aluminum Sliders
- * The camera holder features 13-postion and 270 degree adjustable angle.
- Parts Includes
- Underwater Camera pre-assembled on Pole & 50ft Cable, 2-way Power Splitter, AC/DC 12V Power Adapter, Quick Starter Guide, Extra Accessories of Pole Assembly Kit, Pole Mount Monitor when optionally purchased
- Special Instruction
- * This telescopic pole is designed to be the best for extending side ways or downward, but when necessary to extend sliders upward, you must handle it exactly according to the instruction manual. Otherwise you will be responsible for repair that caused by damages incurred by improper operation.
- *This camera is specially designed to use in the saltwater, but it's strongly recommended to wash all equipments thoroughly with warm water after every use for 100% free from corroding as you clean up with scuba gears.
- MONITOR SPECIFICATIONS
- tem#
- EMT-100
- Description
- 5.6" TFT-LCD Color Monitor w/ New Panel
- Specification:
- Screen Size
- 5.6 inches (14.1cm) - Diagonal Length
- Screen Type
- Color TFT-LCD (Active Matrix) - New Taiwan Panel
- Pixel Format
- 960(H) x 234(V) Dots
- Back Light
- CCFT (Cold Cathode Fluorescent Lamp)
- Brightness
- 400 nits
- Broadcasting Signal
- NTSC & PAL Auto Switching
- Input Power
- DC 12V
- Power Consumption
- 700mA Maximum
- Dimension
- (W)5 3/4" x (H)4 1/4" x (D)1 1/8"
- Weight
- 11.5oz (326g)
- Connector
- RCA Video Input (2), RCA Audio Input (1), DC Input (1),
- Φ3.5mm Earphone Output Jack(1)
- Input Video Signal
- 1Vp-p Composite 75 ohm
- Speaker
- Built-in 0.5W Type (1)
- Function Control
- Power on-off; Video Input select; Menu; Volume; Color; Contrast; Brightness; System Select
- Special Function
- V2 screen shows a mirror image when SYS2 is selected and another camera is plugged in the video-2 cable jack in red
- Operating Temp
- 32 ~ 104ºF (0 ~ 40ºC), RH95% Max
- Storage Temp
- -13 ~ 176ºF (-25 ~ 80ºC), RH95% Max
- Monitor Set Includes
- AC/DC Power Supply (12V-1.0A); Swivel Mount; Remote Control Unit; A/V Cable; Manual
- Special note
- 1-Year warranty will not cover if the monitor is burned caused by using none regulated power supply and so please always use either the included power adapter or 12V regulated power supply of your own.
|
|
|
|
|
|
|
|
|
